Centrale des maths - centraledesmaths.uregina.ca
Dilemmes & doutes
« D & D »
 Sujet: arc
nouvelle recherche

161 articles trouvés pour ce sujet.

 Page1/1
 Solides d’Archimède 2014-04-29 Clémentine pose la question :Pourquoi une pyramide a base carrée n'est elle pas un polyèdre archimedien ? J'ai pourtant essayé d'en construire un avec tout ses cotés égaux et ça fonctionne ! Aidez moi je n'en dors plus la nuit ? :SChris Fisher lui répond. Un bénéfice de 5% 2008-03-11 mahiques pose la question :Un propriétaire decide de vendre deux parcelles de terrains pour un montant total de 141750 F. Il fait un bénéfice de 15% sur la première et une perte de 10% sur la deuxième. L'ensemble de la transaction lui a rapporté un bénéfice de 5%.combien a-t-il vendu chacune des parcelles ?Pierre-Louis Gagnon lui répond. Le salinon d'Archimèdre 1999-03-11 Don Craig pose la question :I am trying to find the English translation of "Le salinon d'Archimèdre" and would appreciate any help. This is a figure, presumably studied by Archimedes, created from 4 semi-circles. Since I can't draw it for you, I will try to describe it with the help of the 5 collinear, horizontal points below. `. . . . . A B C D E ` A semi-circle is constructed on AE as diameter (let's say above AE). Two more semi-circles are then constructed with diameters AB and DE on the same side of the line AE as the first semi-circle (above it). Finally, a fourth semi-circle is constructed on diameter BD, this time on the opposite side of the line AE from the others (i.e. below the line). These semi-circles and the region enclosed by them constitute what is called in French "Le salinon d'Archimèdre". If you know the English name of this curve I would appreciate it if you let me know.Harley Weston lui répond. Distance between a chord and its arc on a circle 2018-03-23 Doug pose la question :Specifically, what is the subject distance for the Earth orbiting for 27 days. Assume the orbit of the Earth to be a circle have a 93 million mile radius. Assume the angle of arc to be (27/365) x 360 degrees. Thank you.Penny Nom lui répond. An arched window 2017-07-24 Gerry pose la question :Looking to make a full size template for an arched window. Need increments every 16". The radius is 138' 0 9/16" , the chord is 226" and the rise at center of chord is 43"Penny Nom lui répond. A parabolic arch 2017-01-05 Rand pose la question :It is most likely already been answered but I can not seem to find the right key words for the search engine?. What I am looking for is, if you have an have arch/arc and you know the degree of slope and the height of the arch/arc from ground lvl; how do you factor the decreasing angle/#’s to get the distance tween the two feet on the assumption that the arch/arc is curved all the way to ground lvl? a. where the legs widen continuously (till they hit ground) so yes parabolic & b. where the legs come down straight after a ½ circumference run. What I am focusing is the parabolic. Many ThanksHarley Weston lui répond. Radius angle and arc length 2016-11-24 pavidthra pose la question :Length or arc 11 and angle of subtended 45.need to find a radiusPenny Nom lui répond. A search area 2016-08-13 tammy pose la question :if your searching an area and you go 300 km from point A and search 380° what or how much area would you search?Penny Nom lui répond. A sector of a circle 2016-04-21 mustafa pose la question :In a sector of a circle, the arc length is equal to half the perimeter of a sector.find the area of a sector in terms of rPenny Nom lui répond. Heights at various points along an arc 2016-04-15 Isiah pose la question :So I am working on a problem with a few friends; you have an arc with the center of its chord at 0,0. We also have a known sagitta and a known radius of curvature. How do we calculate the height extending in both the positive and negative directions? Central sag: 2.48 Chord length: 9.6Penny Nom lui répond. tan inverse 1/4 2016-03-14 nazz pose la question :prove; tan inverse 1/4=1/3 cot inverse 52/47Chris Fisher lui répond. Shooting a ball at a target 2016-02-16 Thys pose la question :Hi I have a problem with the formula that i use .(for programming) I have looked all over the web to find a solution but no luck. I have a cannon that shoots a ball at a target I use this formula to calculate what my initial velocity must be to hit the target at a angle of 30 degrees and a distance of 15m (the cannon and target position is known) It works perfectly if both is at same height but if one is higher or lower it miss. In an example I am working with the range is 30m, the angle is 45 degrees and the target is 10m higher than my position. Please help Formula = V0 = √RG / Sin(2α)Harley Weston lui répond. A chord of a circle, the central angle and the radius 2016-01-26 Nishan pose la question :If chord length is given along with angle then how to calculate the radius.Penny Nom lui répond. The height of a parabolic arc 2015-12-30 Tom pose la question :Is there an algebraic means to determine the highest point of a parabolic arc if the base and perimeter are known?Penny Nom lui répond. Drawing an arc 2015-12-04 hassan pose la question :how to draw a curve long 1m with an angle of 22.5?Penny Nom lui répond. A parabolic arch 2015-11-30 Muhammad pose la question :An arch over a road has a parabolic shape it is 6 meter wide at the base and is just tall enough to allow a truck 5 meter high and 4 meter wide to pass a): assuming that the arch has an equation of the form y=a(x)^2+b use the given information to find a & b. explain why this assumption is reasonable. b): sketch the graph of arch equationPenny Nom lui répond. Archimedes, Euclid and "Circular Reasoning" 2015-11-15 Ron pose la question :I have read about Archimedes and his work with sphere in cylinder and cone in cylinder and the volume relationships. Did he or any others also extend this to regular based polygon based regular like pillars, and columns? The ratio of 1/3 to 1 whole holds true with all regular based columns as example: a regular pyramid having a regular hexagon base inside a regular hexagon column of equal height.Chris Fisher lui répond. The distance over a Quonset 2015-08-20 jane pose la question :total base of hemisphere is 30 ft apex height is 20 feet what is total length over domePenny Nom lui répond. Locating the center of a circle that forms an arc 2015-04-23 Ken pose la question :Find the Cartesian coordinates of the center of an arc with the given location of the beginning and end points and radius length. Not the midpoint of the circumference but the actual point that the arc is drawn around. I know their are two answers depending on the direction of the arc. Unless we assume that all arcs are drawn counter clock wise. Thanks Ken Harley Weston lui répond. The perimeter of a parcel of land 2014-09-18 Shirley pose la question :What is the perimeter of a parcel of land that is 564 acres squarePenny Nom lui répond. A chord and an arc of a circle 2014-08-06 Luis pose la question :Hello I am trying to figure out how to get chord lengths of quarter points for a circle. I work with large diameter circles and I need to be able to find chord length from 0 degrees to 90 degrees, 0 degrees to 270 degrees, 270 degrees to 180 degrees and 90 degrees to 180 degrees. Can you please use 100ft. diameter as example and work out the problem. I'm sorry if I use wrong terminology, I'm really bad at math . Thank you in advance for your time and help I really appreciate it.Harley Weston lui répond. An arc subtended at the center of the Earth 2014-07-20 Abhinav pose la question :Meerut is 60 km from Delhi. Find the nearest second the angle subtended at the center of the earth by the arc joining these two points,earth being regarded as a sphere of 5940 km radius.Penny Nom lui répond. A reversed curved on a railroad track 2014-06-19 cherrielyn pose la question :Assuming that earth is a sphere of radius 6380 km, what is the difference in the latitudes of two cities 270 miles apart positioned on the same meridian? Thank you in advanced po! :)Penny Nom lui répond. Two overlapping arcs in a square 2014-03-15 Jean pose la question :I have a square with side 4 cm. There are two overlapping arcs going from vertex to diagonal vertex. The other two vertices are the center of the arcs, which are shaded. How do I find the area of the shaded arcs? The overlapping arcs when shaded resemble a long thin football Thank you for your help.Penny Nom and Walter Whiteley lui répond. A chord length of 2 cm 2014-03-13 prema pose la question :I am having only chord length as 2cm. how to find arc length and degreePenny Nom lui répond. A circle, a chord and an arc 2013-04-16 Tim pose la question :Morning, I was told the chord is 3000mm and the depth of chord is 300mm, I can find the radius,(1500 squared + 300 Squared) Divided by (300 + 300) but don't know how to calculate the length of the circle defined by the chord. Regards TimPenny Nom lui répond. The degree measure of the central arc of a circle 2012-10-17 Crystal pose la question :On a circle with radius of 12 cm is an arc of length 20 cm. What is the degree measure of the central angle used to make this arc?Penny Nom lui répond. A tapestry rod on a curved wall 2012-08-14 Marlyn pose la question :I have a curved wall with a radius of 6'. I am trying to have a 36" rod made to hang a tapestry and need to figure out the degree measure of the arc. Can you help me please?Penny Nom lui répond. Archimedes Burning Mirror 2012-07-17 Frakeetta pose la question :Archimedes Burning Mirror There is a story about Archimedes that he used a “burning mirror” in the shape of a paraboloid of revolution to set fire to enemy ships in the harbor. What would be the equation of the parabola that one would rotate to form the appropriate paraboloid if it were to be designed to set fire to a ship 100m from the mirror? How large would the burning mirror need to be? What is the likelihood that this story is true?Robert Dawson lui répond. A parabolic arch 2012-01-04 Swathi pose la question :A plan for an arch in the shape of a parabola is drawn on a grid with a scale of 1m per square. The base of the arch is located at the points (0,0) and (15,0). The maximum height of the arch is 18m. a)Determine the quadratic function that models that arch b)State the domain and range of the functionPenny Nom lui répond. How much work is done? 2011-10-15 Jean pose la question :"A conical buoy that weighs B pounds floats upright in water with its vertex "a" feet below the surface. A crane on a dock lifts the buoy until its vertex just clears the surface. How much work is done ?"Penny Nom lui répond. The length of an arc 2011-08-24 nuel pose la question :Is there any formula to calculate the arc length from only the chord length and angle between the chord and tangent of the arc at its endpoint ?Penny Nom lui répond. Find the rate at which the searchlight rotates 2011-04-17 Meredith pose la question :A searchlight is position 10 meters from a sidewalk. A person is walking along the sidewalk at a constant speed of 2 meters per second. The searchlight rotates so that it shines on the person. Find the rate at which the searchlight rotates when the person is 25 meters from the searchlight.Penny Nom lui répond. The degree measure of an arc in a circle 2011-04-08 Deb pose la question :How do I find the degree measure of an arc in a circle with the Length of 14 and the radius of 70?Penny Nom lui répond. A region bounded by a chord and an arc 2011-02-28 Gene pose la question :find the area of a segment bounded by a chord and a 45 degree arc of a 36" circleRobert Dawson lui répond. A sector of a circle 2011-01-07 Alice pose la question :the radius of a circle is 7cm the angle of the sector is 68 how do you find thePenny Nom lui répond. Will the ball clear the tree? 2010-11-14 MK pose la question :Sam hits a golf ball with a five-iron a distance of 120m horizontally. A tree 45m high and 35m in front of Sam is directly in the path of the ball. Will the ball clear the tree if the ball makes a parabolic curve and has a maximum height or 80m?Brennan Yaremko lui répond. The low leg height of a shutter 2010-05-20 brian pose la question :I work for a shutter company and am in need of a formula to figure out what the low leg height would be if given the width of shutter, the high point of arch top and the radius. example would be a 18" wide shutter with a 80" high leg on the right side and a 30" radius. I would need a way to figure what the low leg height (left side of shutter) would be. Or if given width, low leg height and radius what the high side would be? If any of this can be given in laymen's terms it would be much appreciated. Thanks, BrianHarley Weston lui répond. Body measurements 2010-04-06 Amirul pose la question :Recently I'm proposing my research question to my teacher for my extended essay. I'm an IB student. My research question is regarding the estimation of human in buying trousers through reference of neck. What does the relation between the diameter of the neck and the diameter of the waist? I want to see how far does the estimation theory is true for different type of people with different BMI(body mass index).. But teacher said that it is golden ratio...so nothing interesting... =( really??? But i search on net.... state that my idea seems do not have any relation with the golden ratio so far..... i just want ask you... am I able to perform in my extended essay if i continue with this research question??Robert Dawson lui répond. Arc length and Chord length 2010-03-13 Darryl pose la question :Is there a formula to determine the chord length of an arc knowing only the arc length and the arc depth (sagitta)? I know you can't find the radius with only these two inputs, but can you find the chord length?Harley Weston lui répond. The distance from a chord to an arc 2010-02-11 matt pose la question :hello, I have to layout a radius without being able to pull from the center my radius is 3819.53 feet and i have a chord length of 275.59 feet if i broke that up into 25.05 feet sections how would i calculate the lengths from my chord to that radius?Robert Dawson lui répond. A tunnel from Toronto to Montreal 2010-01-25 Dave pose la question :I want to make a tunnel from Toronto to Montreal (for example) Something like this http://mathcentral.uregina.ca/QQ/database/QQ.09.09/h/grant1.html ------------- My coordinates are 45.442455,-73.861340 (Montreal) and 43.442455, -79.861340 (Toronto) I need to know how to find arc distance, chord distance and radius What websites can i find for this subject Google has many but they are useless (blah blah) websites LOL ThanksChris Fisher and Robert Dawson lui répond. The height of an arch 2010-01-02 kamer pose la question :given the radius 1.696 also the cord length 1.958 find the height between the cord and the arch.Penny Nom lui répond. Chord length given the length & radius of an arc 2009-12-31 Wayne pose la question :Given the length & radius of an arc, is there a formula that will accurately calculate the chord length? I'm an architectural designer, and would need it explained in layman's terms. Thank you. WaynePenny Nom lui répond. The radius of an arc 2009-10-13 AYMAN pose la question :Question from ayman: i would like to know the radius of an arc , i do not know the angle , can u please explian it with an example , all i know , or i think i know is a draw line , the reason i asked yu guys this Q , is i am a boilermaker apprentice , sometimes i do deal with a bended pipes or flate plates of metal . when i try to do the same bend as these pipes , it is quite hard so for me to find out the radius of the pipe already bended & find out the angle i will be able to know the full length of the material thats all , thank youRobert Dawson lui répond. Sagitta 2009-09-10 Robert pose la question :Can you please tell me if there is a formula to figure out the Sagitta of an arc when you know the radius, chord length, and arc length?Chris Fisher and Harley Weston lui répond. Find the central angle 2009-08-18 Larissa pose la question :In a circle, the length of a chord AB is 4 cm and the length of the arc AB is 5 cm. Find the central angle theta, in radians, correct to four decimal places. Then give the answer to the nearest degree. I think I'm supposed to use Newton's method, but am not sure how to start with this problem.Harley Weston lui répond. The layout of an arch 2009-08-18 Steven pose la question :I am trying to layout a large radius between 2 points in a building and need a formula to figure different senarios for example: radius is 187'6" distance between 2 points is 34'8" need points 16" apart along the line between the 2 points to create the radius please helpStephen La Rocque lui répond. Arc length 2009-07-10 farhad pose la question :hi i need to measure length of arc by having only two measurements, first the length of the chord and the height of the curve. if i have a simple calculator that haven't sin cos tang (i want to calculate it in my mind)Stephen La Rocque lui répond. The radius of an arc 2009-06-12 Billy pose la question :I have tried using the formula 4h2(squared)plus L2(squared)divided by 8h to find the radius of an arc, but I must be doing something wrong since I keep getting the wrong answer. Can you tell me what I am doing wrong. The height is 37.75 in. and the length is 18.875 in. Thank you for any help you can give me.Stephen La Rocque lui répond. An arched or round top window 2009-04-07 Dale pose la question :I need a formula to figure the lineal footage of trim require to trim an arched or round top window. The variables that I have consist of the width of the window the height of the arc and the radius.Harley Weston lui répond. The length of an arc 2009-04-04 Dale pose la question :If I have the length of the chord and the height of the arc can I find the arc length with these dimensions?Harley Weston lui répond. The height of an arc at the peak 2009-04-01 Ed pose la question :What is the term used to describe the height of an arc at the peak?Stephen La Rocque lui répond. A parabolic arch 2009-03-28 Jeni pose la question :A doorway is in the shape of a parabolic arch. Find the width of the doorway 1m above the floor. Given: the height and the width of the doorway is 4m and 3m respectively.Penny Nom lui répond. A cord length and angle measurement 2009-03-26 larry pose la question :i have a radius of 185". and an arc length of 186.5". how do i find the arc degrees or cord length?Harley Weston lui répond. Forming an arc with 2 inch steel 2009-02-11 Craige pose la question :I need to calculate the bending radius of 2" wide steel to achieve given inside and outside arc lengthsHarley Weston lui répond. Archimedes' formula for parabolic arches 2009-01-23 La pose la question :Use calculus to verify Archimedes' formula for y=9-x^2. Prove Archimedes' formula for a general parabolic arch.Harley Weston lui répond. Parallel distances from arc of circle to its chord 2009-01-16 Roger pose la question :Give the length of a chord of a circle and the height of the arc, how do I find the lengths of equally spaced parallel lines drawn from the chord to the arc. (Think of the lengths of vertical slats in an arch-topped bed head board.)Chris Fisher and Stephen La Rocque lui répond. An arch is in the form of a semi ellipse 2008-11-03 jessica pose la question :An arch in the form of a semi ellipse has a span of 10 meters and a central height of 4 m. Find the heights of the arch at a point of 3 meters from the semi minor axis.Penny Nom lui répond. A bay window 2008-10-30 Scott pose la question :Given the length of an arc, the rise of an arc, and the number of segments that I need to divide the arc into - how do I determine the length of each segment? Imagine a bay window. It could have 5 side or 7 sides, just as an example. How do I determine the width of each window given that the unit will be mounted into a frame with a 96 inch opening. The rise of the unit will extend out 18 inches. Lets say that the number of single windows unit within the unit is 5. How wide should each window be? Do you understand?Harley Weston lui répond. An arc and an angle 2008-10-05 Cory pose la question :I have a chord length of 150'. From the left starting point, I know that 30' right of starting point is 9' in height. This would be the top of the arc. What is the arc in degrees and can anyone display an image to help me understand?Penny Nom lui répond. Finding the Distance Between Two Latitudes 2008-10-02 Samua pose la question :Assuming that the Earth is a sphere of radius 4000 miles and that the cities are on the same longitude (one city is due north to the other). Find the distance between the cities with the latitudes of 37 degrees 47'36'' and another city with 47 degrees 37'18''. Heeeeeeeeeeelp!Janice Cotcher lui répond. The length of an arc 2008-09-04 Angie pose la question :Segment PR is a diameter of circle S. If angle P =3D 25, find minor arc QR. This circle has an isosceles triangle in it, it is connected to the diameter,Harley Weston lui répond. Arc-length and sector-angle 2008-08-06 Benson pose la question :If chord length, radius are given, How to find the sector angle and arc-lengthJanice Cotcher lui répond. The length of an arc 2008-07-14 Chris pose la question :trying to find the length of an arc or segment of a circle when the radius or circumference is unknown take a circle, put a line across the circle label it A /B /C A and C are the end points, B is the middle line length is 86. From B to the side of circle is 16. Label that point D need to find the length of A D CPenny Nom lui répond. Chords and arcs 2008-07-11 Ronnie pose la question :We are trying to build a semi life size ark decoration , and we are trying to cut the sides out . The curved sides and we can't figure our radius , all we know is that our chord length is 24ft. any suggestions on how to find the radius or maybe even the arc length or circumference or diameter?Harley Weston lui répond. A five-sided coin 2008-06-29 carla pose la question :A new five-sided coin is to be made in the shape of figure 8.6 The point A on the circumference of the coin is the centre of arc CD, which has a radius of 2cm Similarly B is the centre of arc DE, and so on. Find the area of one face of the coin.Harley Weston lui répond. A space camera circles the Earth 2008-06-16 Rita pose la question :A space camera circles the Earth at a height of h miles above the surface. Suppose that d distance, IN MILES, on the surface of the Earth can be seen from the camera. (a) Find an equation that relates the central angle theta to the height h. (b) Find an equation that relates the observable distance d and theta. (c) Find an equation that relates d and h. (d) If d is to be 3500 miles, how high must the camera orbit above Earth? (e) If the camera orbits at a height of 400 miles, what distance d on the surface can be seen?Penny Nom lui répond. If the arc is 75mm, what is the radius? 2008-06-12 malcolm pose la question :If the are is 75mm, what is the radius?Janice Cotcher and Harley Weston lui répond. Arclength 2008-06-07 prem pose la question :i am engineer, i need the formula for calculate the arclength by using only chord length and radius onlyPenny Nom lui répond. A bridge is built in the shape of a parabolic arch 2008-06-02 megan pose la question :A bridge is built in the shape of a parbolic arch. The bridge has a span of 192 feet and a maximum height of 30 feet. Find the height of the arch at 20 feet from its center. I need the equation and what to fill into the equation...please and thankyou!Penny Nom lui répond. The length of an arc 2008-05-16 Don pose la question :I am trying to determine the length of an arch with a two foot backset from 32 foot frontage.Harley Weston lui répond. The length of an arc 2008-05-12 patricia pose la question :Find the length of the arc on a circle of radius r = 16 inches intercepted by a central angle [theta] = 60 degreesPenny Nom lui répond. Chord, radius, arc length and central angle 2008-04-15 Cindy pose la question :There is a railroad curve with a chord length of 2000 ft. and a central angle of 35 degrees. What is the radius and arc length of the circular arc?Stephen La Rocque lui répond. A parabolic arch 2008-02-14 Angela pose la question :A parabolic arch has an equation of x^2 + 20y - 400 = 0 where x is measured in feet. How do I find the maximum height of the arch?Penny Nom lui répond. The radius of a circular arc 2008-02-04 Bill pose la question :Hi,the Central Angle of a sector of a circle is 40 degrees. The circular arc of the curve has a chord length of 3000 ft. Find the radius(r) of the circular arc.Penny Nom lui répond. A large concrete shape 2008-01-16 Keith pose la question :what is the cubic yards of an area that is not a perfect 1/4 circle? The dimensions are 100ft. x 60ft. x 125ft. curcumferal arch x 3ft. depth?Stephen La Rocque lui répond. Lining up coins visually using geometry and trigonometry 2007-12-31 Jessica pose la question :a) In what order would you arrange a penny, a nickel, a dime, a quarter, and a half-dollar so that they all have the same apparent size? The diameters of the coins, in thousandths of inches, are as follows: penny, 750; nickel, 835; dime, 705; quarter, 955; half-dollar, 1205. b) How should the coins be placed, if the distance between the dime and the half-dollar is 100 units? How far from thw dime should your eye be to see that all the coins have the same apparent size? c) What angle do the coins subtend when they have the same apparent size?Stephen La Rocque lui répond. How would one find the radius? 2007-12-29 Ned pose la question :Given an arc with length of 192 inches (don't know chord length), and arc height of 6 inches, how would one find the radius?Stephen La Rocque and Harley Weston lui répond. An arched entry 2007-11-28 amber pose la question :i am working with an arched entry. i know that the radius is 25' and the height is 20'-11". i need to know the length of the arch and degree of bend of the arch. how do i find these?Stephen La Rocque lui répond. The radius of an arch 2007-11-10 Mark pose la question :How do you determine the raduis or diameter of a circle based on the folowing information: 1. The distance along the circle between two points is 35'-2". This creates an arch. 2. The (chord) distance between the two points is 30'-8". 3. The distance from the center of the chord (on a 90 degree) to the arch is 6'-10 3/4".Harley Weston lui répond. Completing the square 2007-11-01 Mark pose la question :An architect is designing a museum entranceway in the shape of a parabolic arch represented by the equation y = -x2 + 20x, where 0 x 20 and all dimensions are expressed in feet. Determine the maximum height, in feet, of the arch.Stephen La Rocque lui répond. parabolic arch 2007-10-24 ABHILASH pose la question :How find parabolic arch perimeter.Harley Weston lui répond. Arc length and height in a circle 2007-10-23 Bruce pose la question :I have been trying to find a formula that relates height of a segment from the bottommost point of a circle toward the center of the circle to the corresponding distance along the circumference of the circle (i.e. at the point on the circumference intersected by a line perpendicular to that segment). The unknown variable is the height of the segment; the known variables are the radius of the circle and the distance along the circumference.Stephen La Rocque lui répond. Given the arc length and chord length, what is the radius? 2007-10-10 Wayne pose la question :I have the actual length of an arc plus the length of the cord. How do I determine the radius of the arc.Harley Weston lui répond. Parabolic arch 2007-10-09 Nisa pose la question :A parabolic arch has a span of 120 feet and a maximum height of 25 feet. Choose suitable rectangular coordinate axes and find the equation of the parabola. Then calculate the height of the arch at points 10 feet,20feet,and 40 feet from the center.Stephen La Rocque lui répond. Arc lengths, central angles and radii 2007-10-04 Ashutosh pose la question :Jose can remember that the length of an arc is 440cm, but he cannot remember the radius of the arc or the angle at the center. He does know that the angle was a whole number of degrees and the radius was less than 100cm. Find three possible angles and write down the size of each of the possible radii.Stephen La Rocque lui répond. The length of an arc 2007-09-26 swarna pose la question :a wire of length 32 cm is bend to form a sector of circle of radius of 6 cm find the length of the arc of the sectorPenny Nom lui répond. The perimeter of a regular polygon 2007-09-18 Ashwynn pose la question :why does the area of regular polygons with a perimeter of 1000m increase as the number of sides increase?Stephen La Rocque lui répond. The height of an arc at the center 2007-07-17 Bob pose la question :I have a circle with a 26" radius and a cord whose length is 20". How can I find the height of the arc at the center point of the cord?Penny Nom lui répond. The length of an arc 2007-06-18 Lenny pose la question :How do you find out the arc length of a sector 50 degrees wide??Stephen La Rocque and Penny Nom lui répond. Babylonian geometry 2007-06-17 marleen pose la question :The following problem and the solution were found on a Babylonian tablet dating from about 2600BC: Problem:60 is the Circumference, 2 is the perpendicular, find the chord. Solution: Thou double 2 and get 4 Take 4 from 20, thou gettest 16 Square 16, thou gettest 256 Take 256 from 400, thou gettest 144 Whence the square root of 144, 12 is the chord. Such is the procedure. Modern day mathematicians have reasoned that the Babylonian Mathematician who solved this problem assumed that the value of Pi is 3. By explaining in detail how the Babylonian Mathematician must have solved this problem, justify the reasoning of the modern mathematicians.Stephen La Rocque lui répond. A steel arc 2007-05-31 Huw pose la question :Two gate posts 48cm apart and a perfect arc of steel is to be made joining the two posts on top. this steel arc is to measure 12cm higher than the top of the gate posts in its centre point. the question similar to this was asked by "daryl" and answered by "Penny" If you could reply to this i would be very grateful.Penny Nom lui répond. The circumference of part of a circle 2007-05-06 Wallis pose la question :I have more then a quater of a circle, but less than half. What is the circumference if the two side are 7cm and the angle between them is 110 degrees?Penny Nom lui répond. An arc shaped groove into a peice of metal 2007-04-12 daniel pose la question :hello i work at an engineering workshop the other night i was asked to machine an arc shaped groove into a piece of metal the cord length was 6 mm and the height from the middle of the cord to the arc was 1mm i was hoping to find the diameter of the cutter needed to do the job and also the formula to work out how to find the diameter. i believe it is 10mm dia thankyou for your time and knowledgeStephen La Rocque lui répond. A cabinet with an arched front 2007-04-09 Joe pose la question :I am building an arched front cabinet that is 71 inches wide, 12 inches deep at both ends and 16 inches deep at the center. To accurately build this cabinet I need to known the radius of the circle that would form that arch. Thanks, JoePenny Nom lui répond. An arched opening for a large doorway 2007-04-08 Richard pose la question :I am trying to build an arched opening for a large doorway...I know the vertical sides of the opening to be 8'-9" from the floor to the lowest point of the arch on each side...I know it is 15 1/2" from the center horizontal point to the top of the arc...I know the vertical sides are 11'-11" apart...what I need to know is the radius to create the proper arc. Can you help?Stephen La Rocque lui répond. A parabolic arch 2007-03-29 A student pose la question :I am trying to figure out how to work this problem as it doesn't have many details. The problem ask for an equation to satisfy a parabolic arch y = 16 - 0.25x^2 for y>=0. Find the width w of the arch.Stephen La Rocque lui répond. The width of an arch 2007-03-28 Brad pose la question :A parabolic arch satisfies the equation y= 16 - 0.25x^2 for y >= 0. Find the width w of the arch.Penny Nom lui répond. A roadway over a river 2007-03-12 Taranjeet pose la question :My teacher has given us bridge with only one measurement. From the river to the roadway is 50 metres in length (vertically) The question he wants us to find out is. What is the distance between the vertical supports. He has said that: At a horizontal distance of 'x' metres from the foot of the arch the height of the arch, the height of the arch above the river 'h' metres is given by: h=-1/40(x squared) = 3x I don't understand how to find the distance between the support beams. Thank youPenny Nom lui répond. Chords and arc lengths 2007-03-08 Angela pose la question :my dad, who is a welder, asked me a question pertaining to chords and points on an arc to which I cannot for the life of me find an answer or an equation. if you could help, it would be much appreciated. I am sending an attachment of the problem.Stephen La Rocque lui répond. Find the length of the belt 2007-03-08 Helen pose la question :Find the length of the beltPenny Nom lui répond. An arc, a cord and the radius of a circle 2007-01-14 Kevin pose la question :I have the length of the cord and the distance from the cord to the arc, is it possible to find the radius with just these parameters?Penny Nom lui répond. Can the trailer safely pass under the bridge? 2007-01-02 Jim pose la question :A truck hauling a double-wide trailer needs to pass under a parabolic-arched bridge en route or take a 50 mile detour. The trailer is 14 feet high and 15 feet wide. The arch supporting the bridge at this underpass is 18 feet high at the center and 40 feet wide at the base. Can the trailer safely pass under the bridge?Stephen La Rocque lui répond. Splitting A Circle Evenly 2006-12-20 Joe pose la question :I'm trying to make a game board and instead of having it square, I would like to give it a curve (the game is Parcheesi). The attached diagram is pretty much completed (done in AutoCAD). What I would like to know is how to manually find the points that intersect the red line. In other words, evenly split the semi-circle into 8 pieces.Penny Nom lui répond. What is the height of the arc of the earth over a certain distance? 2006-12-01 Thomas pose la question :what is the height of the arc of the earth over a certain distance?Penny Nom lui répond. The radius of an arch 2006-11-15 Kelly pose la question :I am trying to achieve an arc height of .375 on the length of 17.375.Penny Nom lui répond. How do I draw the arc? 2006-07-22 Dani pose la question :How do I draw the arc (calculate the included angle) when I know only the arc length? Stephen La Rocque lui répond. A problem with arc sine 2006-07-07 Scott pose la question :How to prove arc sin x = arc tan( (x)/√(1-x2)) Penny Nom lui répond. Marking out a circle 2006-06-28 Peter pose la question :given a straight line. how do i work out the off sets ( at right angles) at several intermediate points. to set out a 5.0m arc that has a 18.0m radius.Stephen La Rocque and Penny Nom lui répond. The interior angles of a right triangle 2006-05-20 Greg pose la question :I am wondering if there is a way to figure out the interior angles of a right triangle if we know ONLY the side lengths, and the trick is, we CANNOT use arctangent!Leeanne Boehm and Penny Nom lui répond. A fountain of water jets forms parabolic arches 2006-05-03 Jennifer pose la question :Let's say in you have a fountain and the water jets form parabolic arches. The center of the fountain, being the origin of the coordinate system, it is elevated 5 feet off the ground, . The equation formed the water arch is y= -x2+4x, what is the radius of the basin needed to catch the water at ground level?Stephen La Rocque lui répond. A parabolic arch 2006-05-02 Mike pose la question :A bridge over a river is supported by a parabolic arch...arch is 200 m wide at water level...the maximum height of the arch is 80 m..what is the height of the arch measured from a point on the water 40m from the center of the arch?Stephen La Rocque lui répond. The diameter of a pipe 2006-01-27 An other pose la question :I know the base length of my arc (10 inches) - I also know the height at the center to the arc (2 inches). I don't think the end is at the midpoint tho. How do I figure out how long the arc length is? My question involves being able to cut a round pipe into an arc that is 10 inches wide and 2 inches tall. I need to know the smallest diameter pipe to buy in order to fulfill these requirements. Penny Nom lui répond. Sectors and arcs 2006-01-25 Wael pose la question :How is the area of an arc (alpha*pi*r squared/360) derived? How is the length of an arc (alpha*pi*r/180) derived?Penny Nom lui répond. How would I find the length of the radius? 2005-10-15 Stace pose la question :If given the length of a chord (121") and the distance from the midpoint of the arc to the midpoint of a chord (12"), how would I find the length of the radius? Penny Nom lui répond. The length of a circle's chord 2005-09-28 A homebuilder pose la question :find the length of a circle's chord with a known arc length and radius/diameter lengths.Penny Nom lui répond. Given only the length of an arc & the length of its chord find the radius? 2005-09-07 Robert pose la question :Given only the length of an arc (72) & the length of its cord (71), how to find the radius?Penny Nom lui répond. The radius of an arc 2005-08-19 Jared pose la question :I need to be able to calculate the radius of an arc on an existing structure (Supports for Fifth Ave Dimensional Text). I have the overall length of this structure, but, the complication I believe lies in the fact that it is a curve mounted onto a flat section of wall on either side of a very mild curve, therefore, measuring the middle of the wall to the top of the arc does me little good...The reason I need this is to be able to replicate the above curve on a similar structure to be mounted below it...Also, because the client wants the structure mounted on the inside of the opening below the existing, the beginning and end point of the new structure would be lower than the existing, so, I do not believe that it is possible to exactly replicate the radius of the above curve?Penny lui répond. Framing an arched wall 2005-08-12 Mike pose la question :I'm framing a building wall with a curved (arcing) top section. The radius of the section is 74'6" with a height above finish floor of 16'0". The horizontal run of the arced section is 23' 1 1/2" with a low height above finish floor of 12'4". If I start with a 16' stud at the high end how long are the subsequent studs if they are on 16" centers? Short of laying this out on a tennis court how can I work out the lengths of the studs?Penny Nom lui répond. arccos(5/13) 2005-05-31 Kyle pose la question :I would like to know how to evaluate the problem of: Arccos 5/13.Penny Nom lui répond. The volume of a sphere. Why 4/3? 2005-05-30 Lauren pose la question :You know when you find the volume of sphere? I know the formula is V= 4/3 pi r3 but why do they use 4/3?Penny Nom lui répond. Difference in latitude 2005-04-05 Gretel pose la question :Assuming the the earth is a sphere of radius 6378 kilometers, what is the difference in latitude of two cities, one of which is 400 kilometers due north of the other? 500 kilometers?Penny Nom lui répond. arcsech x 2005-02-10 Monica pose la question :Prove that arcsech x = ln[(1 + (1-x2)(1/2)) / x ]Penny Nom lui répond. Arcs and chords 2005-01-09 Aniesha pose la question :A chord of a circle is 48 centimeters long and is 10 centimeters from the center of the circle. Find the radius?Penny Nom lui répond. The gradiant of a hill is 9% 2004-12-18 Jim pose la question :The gradiant of a hill is 9%. What angle is created by the run/rise of the hill and 0 degrees?Penny Nom lui répond. A belt around two pulleys 2004-12-07 Ian pose la question :a belt is stretched around two pulleys whose centers are d units apart and whose radii are R and r respectively (obviously R+r

 Page1/1

 Centrale des maths reçoit une aide financière de l’Université de Regina et de The Pacific Institute for the Mathematical Sciences.
 Qui sommes-nous :: carte du site :: our english site